01 Nov


For you to be able to show compliance to the Conservation of Fuel & Power, of Building Regulations for non-dwellings or commercial property then see to it that you will be doing an SBEM calculation. Evaluating that the actual building is what is being done once an SBEM calculation ibis undergone. It is an SBEM calculation is needed in order to make sure that a certain building is efficient and is able to perform better according to the current standards set by Building Regulations. If you are looking into a notional building then it is the one that will be different in a small from that of the actual building. The percentage windows used within the calculations is one of the differences that they will have. A difference in the M&E installations such as heating, cooling, ventilation, hot water generation, and lighting is what you are also able to see.


Once you have a building that merely complies to standards then it is the one that will nto ave successful result when it comes to the SBEM calculation. The vast improvement of the energy performance of new buildings is one of the reasons why the standards have also increased. Having a sure outcome is a thing that you are able to do once you will be able to follow the standards. When it comse to factors like u-values, air tightness or lighting efficiencies then you need to make sure that they will be efficient.


It is the SBEM calculations that some properties will not able to pass especially without the introduction of renewable energy. And this is the reason why Air or Ground Source Heat Pumps, Solar Thermal or Combined Heat, Photo-voltaic, and Power (CHP) Plant should be utilized. It is these things that can be modeled to the SBEM calculation tool in order to identify the one that will fit the client. Read more about energy from this website at https://www.britannica.com/science/renewable-energy.


Passing the SBEM calculation at www.ealconsult.com is a thing that you are able to do once you will be able to make the building as thermally efficient as economically possible in the first instance. It is this one that is considered to be the first step. See to it that you are able to have a building that has a very good airtightness of around 5 m³/hr.m² at 50pa or less. Another thing that you also will need to ensure is the lighting loads should be to a minimum with technologically advanced switching applied. The heating and cooling efficiencies are maximized within financial constraints which is a thing that you also will need to make sure of.


Having a significant experience in producing SBEM Calculations is also another thing that you need to do to achieve success. If you are taking a look at different buildings like leisure to multi-story office blocks, flagship industrial facilities, schools, hospitals, and large hotel developments then it is them that will also have varying needs and solutions. Know more here!

* The email will not be published on the website.